Vortec 787 : NEMA 4 Vortex AC 1700 Btu 25 SCFM UL Complete Kit

Vortec 787 : NEMA 4 Vortex A/C, 1700 Btu, 25 SCFM, UL, No Thermostat but includes 5-micron Auto-Drain Filter & Ducting Kit

Keep Electrical Enclosures Cool, Clean and Protected

Today’s small and compact, multi-function electronic controls, variable speed drives, servos and programmable logic controllers are extremely sensitive to heat and contamination. Smaller cabinet sizes make temperature control difficult and contribute to significant premature failures. Excessive heat causes components to "cook", digital displays to misread, controls to drift, and breakers to trip below their rated loads. The result is often lost productivity from machine or line shutdowns.

Fans often provide inadequate cooling and commonly pull in dirty, humid air creating another source of failure. Air conditioners require ongoing maintenance and are relatively expensive, large and difficult to install.

Vortec’s Vortex Cooler Enclosure Coolers are the affordable, low maintenance, easy to install alternative for keeping enclosures cool and clean without Freon or other refrigerants.

Specifications

NEMA Type NEMA 4 Pressure 100 psig 6.9 bar Thermostat No Thermostat Cooling Capacity 1700 Btu/hr 428 kcal/h Air Consumption 25 SCFM 708 SLPM Inlet 1/4 NPT

Additional Information

All Vortex Cooler systems include a 5-micron Auto-Drain filter and a ducting kit to distribute cold air throughout the enclosure. Thermostatically controlled models also contain a solenoid valve and thermostat, limiting compressed air usage to those times when cooling is required. NEMA Ratings 12 – Indoor Dust Tight/Drip Tight 4 – Outdoor Weatherproof/Washdown 4X – Outdoor Weatherproof/Washdown Corrosion Resistant All Vortex Coolers are UL-listed and maintain NEMA 4, 4X and 12 ratings based on selected model. Coolers are designed to use a filtered factory compressed air supply of 80 -100 PSIG. With no moving parts to wear out or maintain, Vortex Coolers use only compressed air and vortex tube technology to produce quiet, efficient and reliable cabinet cooling. As an added benefit, these coolers create a slight positive pressure inside the enclosure to prevent dirt or dust from entering - even in the most challenging environments. Vortex Coolers easily mount in tight spaces, with all models ranging only from about 7 to 11 inches tall. How Enclosure Coolers Create Cold Air Vortex Cooler Enclosure Coolers are powered by a Vortex tube – a unique device that creates a vortex from compressed air and separates it into hot and cold air streams. Here’s how it works. The vortex tube’s cylindrical generator causes the input compressed air to rotate reaching speeds up to 1,000,000 rpm as it is forced down the inner walls of the hot (longer) end of the vortex tube. At the end of the hot tube, a small portion of this air exits through a needle valve as hot air exhaust. The remaining air is forced back through the center of the incoming air stream at a slower speed. The heat in the slower moving air is transferred to the faster moving incoming air. This super-cooled air flows through the center of the generator and exits through the cold air exhaust port. Choose the best thermal management solution for your electrical enclosures and control panels - Vortec’s Vortex Coolers From small computer cabinets and touch-screen control panels to large electrical enclosures, a Vortex Cooler can protect sensitive controls from overheating to eliminate heat and dirt related shutdowns. Models are available to provide cooling capacities ranging from 400 to 5000 BTUH (101 to 1260 kcal/H). Compact and easier to install than air conditioners and most fan units Has no moving parts for highly reliable cooling protection Keeps components clean - no outside air ever enters the cabinet Offers quiet operation and little to no maintenance An affordable, UL-listed solution that maintains NEMA 4, 4X and 12 ratings

• Thermostatically-controlled to save energy. Continuous cooling models are available.
• Powered by compressed air, utilizing a vortex tube to generate cold air without Freon or other refrigerants (CFCs/HCFCs).
• Exceptionally reliable, no moving parts to break or wear.
• Low maintenance
• Cooling capacities to 5000 BTUH (1260 kcal/H)
• Maintains NEMA 4, 4X and 12 ratings. All models are UL-listed.