Loading... Please wait...
- Home
- Enclosure Components
- 08410.0-00 Electrical Enclosure Drainage Device
Product Description
- High degree of protection
- Good drainage performance
- Easy to install
- Robust, weather and UV-light protected housing
Condensate occurs in enclosures and housings with high protection type by variations in temperature. The use of a drainage device allows the conveying of the condensate without loosing the maximum protection type of IP66. The water permeable membrane makes sure the drainage of the enclosure by the capillary attraction. The construction prevents the infiltration of splash water into the enclosure.
Technical details
| Mounting | thread M50 x 1.5 with nut (wrench size 60mm, housing 50mm) |
| orque | 6Nm max. |
| Depth in enclosure | max. 17.5mm |
| Material | plastic according to UL94 V-0, umbra grey, weather proof and UV light resistant according UL746C (f1) |
| Water entry hight | 0mm (at 0.5mm wall thickness) |
| Sealing | sealing gasket NBR |
| Water flow-though | approx. 200ml/h at a water column of 5mm |
| Dimensions | Ø 60 x 49.5mm |
| Fitting position | vertical, lowest point |
| Operating / Storage temperature | -45 to +70°C (-49 to +158°F) |
Installation
Make cut-out Ø 50.5+0.5mm in enclosure bottom and mount pressure compensation device with nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure and the hole is free of burrs.
|
Art. No. |
Protection type | Enclosure wall thickness | 1 package unit | Weight (approx.) |
| 08410.0-00 | IP66 / IP67 (EN 60529) / IP69K (EN 40050-9) | 0.5 - 5.5mm | 1 piece | 60g |
recommended
-
$107.00 -
$112.00 -
$86.60 -
$27.60 -
$15.00
